The spindle and the device characteristics three centrifuge

Release date：2016-02-29 00:00 source： Click：

A spindle

The spindle bearing, and three foot centrifuge drive device is installed in the machine casing, the host is flexible support. Spindle design into rigid shaft short and thick, to reduce the height of the machine, convenient operation and maintenance.

With the main shaft and the drum is a conical surface, by cone friction torque. At the end of the shaft using a large nut so that the drum pressing on the spindle.

Two, suspension support device

Three foot centrifuge suspension support device structure should fully guarantee the body in the horizontal direction have larger swing, forming a flexible system, the system of self vibration frequency should be far below the rigidity spindle rotation frequency, to reduce uneven impact on bearing load. Drum level swing can with flow of material in drum distribution more uniform and improve the machine's operation ability, reduce the operation of the machine foundation vibration.

Suspension support device has a variety of different structural forms. The old textile dewatering with three foot centrifuge is hanging with three root metal links in a few of the three pillars, known as a chain hanging. The system has the advantages of simple structure, good flexibility, can be automatic, but poor adjustability, can not adapt to the different damping requirements, now have good use.